Brand Safety: 5 Ways to Win CX in 2026

Listen to this article · 11 min listen

By 2026, relevant ads are just table stakes. Consumers expect ads that respect their values and show up in places they trust. This means brand safety and a positive customer experience (CX) are inseparable for any digital ad strategy that actually works, because a bad placement doesn’t just waste ad spend, it actively damages brand perception and kills your conversion rates. So, how can marketers ensure their campaigns actually build trust?

Key Takeaways

  • Turn on pre-bid brand safety filters in your DSPs (The Trade Desk is a prime example). Start by setting exclusion lists for the obvious junk like “Adult Content,” “Hate Speech,” and “Illegal Downloads” to stop bidding on that inventory from the get-go.
  • Move beyond simple keyword blocking and use contextual targeting tools. Something like Integral Ad Science’s Context Control lets you proactively find brand-aligned content themes and keywords, not just avoid bad ones.
  • You have to audit where your ads actually ran. Use verification platforms like DoubleVerify to analyze post-bid data, looking hard at viewability, invalid traffic, and any brand suitability violations so you can tighten up your settings for the next flight.
  • Create a clear internal brand suitability framework. This document should define your specific risk tolerances for different types of content and be the single source of truth for all your media buying teams and agency partners.
  • Don’t rely entirely on the open exchange for your most important campaigns. Cultivate direct publisher relationships to get premium inventory and negotiate private marketplace (PMP) deals with publishers who are known for high-quality, safe content.
Aspect Pre-Bid Brand Safety Filters Contextual Targeting Tools
Primary Goal Prevent bids on inappropriate inventory Actively match ads with brand-aligned content
Mechanism Exclusion lists for content categories Analyze page content for sentiment and themes
Example Tools The Trade Desk, Google DV360 IAS Context Control, DV Authentic Context
Approach Reactive: avoiding negative environments Proactive: seeking positive environments
Risk of Over-Exclusion High: can limit reach, drive up CPMs Lower: focuses on positive alignment
Keyword Usage Simple keyword blocking Understand sentiment beyond keywords

1. Define Your Brand Suitability Framework

Before a single dollar is spent, marketers need a clear definition of a “safe” and “suitable” environment for their brand. This solution isn’t one-size-fits-all. What’s fine for a casual gaming app would be a PR nightmare for a luxury automotive brand. I always recommend a multi-tiered approach, sorting content into “safe,” “caution,” and “exclude” buckets. A financial institution, for instance, might put “news about market volatility” in the caution category, which means it needs human review or special disclaimers, while “financial crime reports” goes straight to the exclusion list. This framework has to be a formal, documented guide shared with your entire marketing department and any outside agencies.

A solid starting point is the IAB’s Brand Safety and Suitability Framework. This industry standard provides a taxonomy of content categories, from “Adult” and “Arms” to “Gambling” and “Illegal Downloads”, that can be adapted for your own use. But you have to go beyond these general categories and get specific about what matters to your brand. A children’s toy company, for example, would be smart to add “violent cartoon content” to its exclusion list, a nuance that might not be caught by a standard “violence” filter.

Pro Tip: Internal Stakeholder Alignment

Make sure legal, PR, and senior marketing leadership are all involved in creating your brand suitability guidelines. Their input makes sure the framework aligns with company-wide compliance and reputational risk strategies. This is a critical component of corporate governance, not just a task for the media buying team.

2. Implement Pre-Bid Brand Safety Filters on DSPs

Your first and best line of defense is at the demand-side platform (DSP), where you can block bad placements before a bid is ever made. The major DSPs, including The Trade Desk and Google Display & Video 360 (DV360), have powerful pre-bid filtering. Inside The Trade Desk, for example, you’d navigate to your campaign’s “Targeting” section and then to “Brand Safety.” From there, you can pick from content categories supplied by third-party verification partners like Integral Ad Science (IAS) or DoubleVerify (DV).

If you’re taking a conservative approach, I usually start by excluding categories like “Adult Content,” “Hate Speech,” “Illegal Downloads,” “Obscenity,” and “Sensitive Social Issues,” which you’ll find as simple checkboxes or dropdowns. On top of that, custom exclusion lists of specific URLs or apps you’ve flagged as problematic can be uploaded. These lists must be updated regularly based on what you’re seeing in your campaign reporting. You can find similar controls in DV360 under “Brand Safety” in the insertion order settings, which let you apply content classifications and keyword exclusions.

Common Mistake: Over-Exclusion

Being too strict is a real risk that can severely limit your campaign’s reach and drive up CPMs. If you block too many categories or keywords, you’ll cut yourself off from perfectly good, relevant inventory. Excluding the word “crime,” for instance, might stop your ad from running on a respected news site’s story about local crime statistics, a placement that could be totally fine, depending on your brand. It’s about balancing protection with performance.

3. Use Contextual Targeting for Positive Ad Context

Just avoiding negative environments isn’t enough. You should be actively seeking positive ones. This is where the idea of ad context really pays off. Tools such as IAS Context Control or DV Authentic Context analyze the content of a page in real time, matching your ads with environments that are not only relevant but also aligned with your brand’s image. These tools go far beyond just blocking keywords by actually understanding the sentiment and themes of an article.

Imagine you’re running ads for new athletic wear. Instead of just blocking the word “injury,” content discussing “fitness tips,” “marathon training,” or “healthy lifestyle choices” can be targeted. In DSPs that have these tools integrated, you’ll find options for building out custom contextual segments. With IAS, for example, this could mean choosing “Wellness & Fitness” categories and then getting more granular with keywords like “endurance training” or “nutrition for athletes.” This approach ensures ads appear alongside content that primes users for messages, which enhances both brand safety and campaign effectiveness.

A 2023 Nielsen report found that ads in contextually relevant spots had a 31% lift in brand favorability. These tools actively seek good environments, rather than just avoiding bad ones.

4. Implement Keyword and Topic Exclusion Lists

Even with sophisticated contextual targeting, old-school keyword and topic exclusion lists are still an essential part of the toolkit. These lists are your blunt instrument for preventing ads from showing up on pages with specific words or sensitive subjects. You can upload negative keyword lists in most ad platforms, whether it’s Google Ads, Meta Ads Manager, or your DSP. A travel brand, for example, would want to exclude keywords like “cancel,” “delay,” “disaster,” or “pandemic” to dodge negative associations. In Google Ads, you can find “Excluded topics” and “Excluded keywords” under “Content suitability” in your campaign settings.

These lists need attention. A topic that was sensitive last year might be fine today, and new issues pop up fast. I push for a quarterly review of all exclusion lists, checking them against current events and brand messaging. This task requires ongoing vigilance. It’s not a set-it-and-forget-it job.

Pro Tip: Layering Exclusions

Combine your keyword exclusions with domain exclusions. If you spot specific websites or apps that repeatedly serve up questionable content (even if they don’t always hit your keyword filters), add them directly to your blocklist. This gives you another layer of protection against repeat offenders.

5. Use Post-Bid Verification and Reporting

Pre-bid filters are excellent but not foolproof. You absolutely need post-bid verification to see where your ads actually ran and to catch any brand safety violations that slipped past your initial defenses. This means integrating third-party verification tags (from IAS, DV, or MOAT by Oracle) directly into your ad creatives. These tags watch your impressions as they serve, flagging problems like brand safety issues, invalid traffic (IVT), and low viewability.

Get in the habit of reviewing the reports from these verification partners. Pay close attention to metrics like “Brand Safety Violations,” “Blocked Impressions,” and your overall “IVT Rate.” If you notice a steady stream of violations coming from a particular publisher or inventory source, it’s time to either adjust your pre-bid filters or cut that source from your targeting completely. For example, if DV shows a 5% brand safety violation rate on a specific exchange, you need to find out why and probably pull back spend. This data helps you refine your strategy. Without this step, marketers are flying blind, just hoping their filters worked.

Common Mistake: Ignoring the Data

A lot of marketers set up verification and then never look at the reports. The data from IAS or DV is actionable intelligence, not just a compliance checkbox. Use it to guide future media buys, update exclusion lists, and even push back on publishers or tech partners when their performance is consistently bad.

6. Prioritize Direct Publisher Relationships and PMPs

The programmatic open exchange offers enormous reach, but it’s also the wild west of brand safety. For high-stakes campaigns where your brand reputation is everything, you should prioritize direct deals with publishers you trust or use private marketplaces (PMPs). A direct relationship gives you far more transparency and control over where your ads go. You can negotiate for specific placements, get guarantees on content adjacency, and even ask for pre-approval on certain pages.

PMPs give you access to curated inventory from top-tier publishers with pre-negotiated terms, which often include much stricter brand safety promises. In your DSP, PMP deals can be specified by their deal ID when you’re setting up a campaign. This drastically cuts your exposure to the long tail of less reputable sites and apps that pollute the open exchange. For a big product launch or a sensitive corporate message, this premium approach provides an invaluable layer of assurance that your message appears in a high-quality environment which directly builds a better customer experience.

Making sure your ads run in trustworthy places is a foundational element for a positive customer experience and for protecting your brand’s equity. By defining a clear suitability framework, using strong pre-bid and post-bid protections, and actively seeking out positive contextual placements, campaigns can resonate effectively and safely with their intended audience.

What is the difference between brand safety and brand suitability?

Brand safety is about avoiding objectively harmful or illegal content like hate speech, violence, or pornography. Brand suitability is more subjective and brand-specific. It’s about content that isn’t necessarily harmful but is still a bad fit for your brand’s values or audience, like a children’s toy ad running next to a heated political debate.

How often should I review my brand safety settings?

You should review your main settings at least quarterly. If your strategy changes or major news breaks, you may need to do it more often. Your post-bid verification reports should be checked weekly to catch any new problems that need a quick fix.

Can brand safety measures impact campaign performance?

Yes, absolutely. Being too restrictive with your safety measures will shrink your available inventory, limiting reach and likely driving up your CPMs. But having no safety measures means wasted ad spend and potential PR disasters. The job is to balance brand protection with campaign effectiveness.

What tools are commonly used for brand safety and suitability?

The key tools are third-party verification providers like Integral Ad Science (IAS), DoubleVerify (DV), and MOAT. They all integrate with demand-side platforms (DSPs) like The Trade Desk, Google Display & Video 360, and Amazon DSP, which also have their own built-in safety controls and contextual targeting features.

Is human review still necessary for brand safety in 2026?

100%. While AI and automation are very effective, human oversight is still essential, particularly for those tricky brand suitability calls. Automated systems can misread context or be slow to catch new, sensitive topics. A person regularly reviewing flagged content and spot-checking placements ensures the tech is working correctly and is aligned with the brand’s latest standards.

Editorial Team

The Editorial Team at Paid Media Studio is a group of writers and editors who cover marketing, brand, and growth. They research each story and publish under a shared desk byline — experts in their fields, working as one team.